SIGNAL GENERATOR

0 out of 5

Description

GENERAL FEATURES

Type RF Signal Generator

MEASUREMENT FEATURES

Frequency Resolution (Hz) 0.1 Hertz
Frequency Range(Hz) 9 KHz to 1 GHz
Temperature stability for reference frequency (PPM) 2
SSB Phase Noise declared at 1GHz,on 20KHz offset
SSB Phase Noise at declared values (dBc) -120
Maximum Output Level (dBm) 5
Minimum Output Level (dBm) -120
Ageing Rate for reference frequency (PPM/Year) 2 inch
Non Harmonics declared at >10 KHz carrier offset
Non Harmonics at declared values(dBc) -120
Harmonic declared at(dBm) 2GHz at level 0 dBm
Output Level Resolution (dB) 0,1
Harmonics at declared values(dBc) -135
Reverse Power Protection(watt) 2 Watt
Accuracy declared at(dB) Levels > -120dB
Accuracy at declared values(dB) -130
VSWR on all operating frequencies 2

AM FEATURES

Amplitude Modulation (AM)Operating Modes Internal
Maximum Amplitude Modulation Frequency (3 dB),f > 100KHz 20 kiloHertz
Minimum Amplitude Modulation Frequency (3 dB), f > 100 KHz 20 Hertz
Amplitude modulation depth(%) 0-90
Resolution of AM 0.1 percent
AM Distortion at 1 KHz 1.5 percent

FM FEATURES

Frequency Modulation(FM) Operating Modes Internal
Maximum Frequency Modulation Frequency(-3 dB)Standard 100 kiloHertz
Minimum Frequency Modulation Frequency (-3 dB) Standard 10 Hertz
Minimum Frequency Deviation 20 kiloHertz
Maximum Frequency Deviation (KHz) 100 inch
Resolution of FM 1 percent
Setting Error (at AF=1 KHz and 50% maximum deviation) for FM(%) 2 percent

PHASE MODULATION FEATURES

Phase Modulation Not-Available
If Available, Phase Modulation Operating Mode Internal
Minimum Phase Deviation (Radians) 0
Maximum Phase Deviation (Radians) 5
Resolution of Phase Modulation(%) 1
Setting Error (at AF=1 KHz) for Phase Modulation(%) NA

PULSE MODULATION FEATURES

Input Level TTL,CMOS
Pulse Modulation Available
Rise and Fall Time <3 micro sec
On/Off Ratio (dB) > 80
Minimum Pulse width(nano sec) 120

OTHER FEATURES

Memory(Minimum Storage Settings) 999
Internal Modulation Generator For AM/FM/PM[Minimum frequency](Hz) 20 Hertz
Internal Modulation Generator For AM/FM/PM[Maximum fequency ](KHz) 80 kiloHertz
Resolution of Internal Modulation Generator For AM/FM/PM 0.1 Hertz
Digital sweep RF
RF Digital Sweep Range and Width freely selectable
RF Digital Sweep Time Range 30ms – 1s
RF Analog sweep Available
RF Analog Sweep Time Range 30ms-90s
If Available,RF analog sweep range and width Freely selectable
other features NA

VECTOR MODULATION FEATURES

Vector Modulation Available
Internal Base Band Generator Bandwidth (MHz) 120
Arbitory waveform memory (Mega samples) NA
Modulation NA
Error Vector Magnitude(EVM) 1 percent

POWER SOURCE

Power Requirements 230 V +/-10% AC, 50 Hz +/- 3%

GENERIC

Interface Available USB
Details of Standard Acessories (To be supplied with the equipment ) NA

OPERATING CONDITION

Minimum Operating Temperature (Degree C) 0 degree Celsius
Maximum Operating Temperature(Degree C) 50 degree Celsius
Operating Humidity(RH) at 45 degree C non condensing 90 percent

SERVICE

Warranty 2 year

TEST REPORT DETAILS

The equipment supplied with calibration certificate YES
conformity to Dry Heat for 16 hours at a maximum temperature in accordance with IS:9000/part-3/section-5/1977 latest YES
conformity to Cold Test for 4 hours at a minimum temperature in accordance with IS:9000/part-2/section-4/1977 latest YES
conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 h each at a temperature of 40 degree C & 95% RH in accordance with IS:9000/part-5/section-1/ 1991 latest YES
Availability of the test report from Central Government/ NABL/ ILAC acredited lab to prove confirmity to the specification NO
Test Report Number and Date for the specification test(not a part of biddable parameter) NA
Name and address of the Lab for the specification test (not a part of biddable parameter) NA

Reviews

There are no reviews yet.

Be the first to review “SIGNAL GENERATOR”